How do I start a test in my Delvotest Go device?

Plug in device
Check if connected to the Wi-Fi, otherwise read article about Wi-Fi connectivity
Wait until device goes at 64°C (GREEN LIGHT)
Gather materials (e.g. sample milk, ampoules, stickers, pipettes)
Check that device is empty - picture
Close the lid
Select cow or goat / sheep
select bulk tank or animal level
Enter batch (Where is my batch number?)
Select how many extra samples do you want to test?
prepare reference if required (1sample is usually reference and you can add up to 3 unknown samples of same species)
Prepare samples as in the screens
add ampoules in the slots
results will be shown in the app after 3.5h for T ampoules and 3h15 for SPNT

Published: 10 November 2025

Was this helpful?

Nam quis tincidunt porttitor turpis eu semper. Netus sed pellentesque proin nec sit cursus quis ut leo.

Important

Although diligent care has been used to ensure that the information provided herein is accurate, nothing contained herein can be construed to imply any representation or warranty for which we assume legal responsibility, including without limitation any warranties as to the accuracy, currency or completeness of this information or of noninfringement of third party intellectual property rights. The content of this document is subject to change without further notice. This document is non-controlled and will not be automatically replaced when changed. Please contact us for the latest version of this document or for further information. Since the user's product formulations, specific use applications and conditions of use are beyond our control, we make no warranty or representation regarding the results which may be obtained by the user. It shall be the responsibility of the user to determine the suitability of our products for the user's specific purposes and the legal status for the user's intended use of our products.©DSM Food Specialties B.V. | Trade Register Number 27235314